E-15
General control (continued)
■
Subwoofer level control (remote control)
To increase or decrease the Subwoofer level, select SW
LEVEL + /-.
.....
−
5
+ 5
−
4
+ 4
Notes:
●
When sound from the speaker is distorted, decrease
the subwoofer level.
■
Display brightness control (remote control)
Press the DIMMER button to adjust the brightness of the
display.
DIM 1
DIM 2
DIM OFF
(Display is dim)
(Display gets dimmer)
(Display is bright)
■
3D sound mode
You can also enjoy the stereoscopic sound regardless of the
number of channels (monaural, stereo, multi-channel) of the
audio signal in 3D surround sound mode.
Press the 3D button on remote control or 3D Surround but-
ton on sound bar repeatedly to select the:
: Make the sound more realistic,
as if you were watching it in
the hall.
: Creates a sound with a
realistic sensation that spreads
horizontally as if you were
watching it outdoors.
: Add surround and height
speaker channel audio to
create a immersive sound.
DOLBY SURROUND
3D OFF
OPSODIS 1
OPSODIS 2
: 3D sound effect off
Notes:
●
3D surround mode may change to match the sound
mode.
■
Volume control
Press the button to increase the volume and
the VOLUME – button for decreasing.
0
100
2
99
.....
1
Notes:
●
When the volume is set to 50 or more and the power is
turned off, the volume will be 50 when the next power
is turned on.
■
Muting (remote control)
The volume is muted temporarily when pressing the MUTE
button on the remote control. Press again to restore the
volume.
■
Dynamic range sound (DRC function)
(remote control)
Compress the dynamic range of the audio signal (the
range from the maximum volume to the minimum volume).
It makes it easier to hear sounds.
Press the DRC button repeatedly to select the:
Play in the dynamic range of the original
recorded sound.
Play in the dynamic range for cleared
sound of the dialogue.
DRC function disabled
Notes:
●
The DRC function works only when Dolby format is
played.
