background image

E-22

Troubleshooting chart (continued)

 

„

Condensation

Sudden temperature changes, storage or operation in an 

extremely humid environment may cause condensation 

inside  the  cabinet  or  on  the  transmitter  on  the  remote 

control.  Condensation  can  cause  the  sound  bar  to 

malfunction.  If  this  happens,  leave  the  power  on  until 

normal playback is possible (about 1 hour). Wipe off any 

condensation on the transmitter with a soft cloth before 

operating the sound bar.

 

„

If problem occurs during operation

When this product is subject to strong external interference 

(mechanical  shock,  excessive  static  electricity,  abnormal 

supply  voltage  due  to  lightning,  etc.)  or  if  it  is  operated 

incorrectly, it may malfunction.

If such a problem occurs, do the following:

1.  Set  the  sound  bar  to  the  standby  mode  and  turn  the 

power on again.

2.  If the sound bar is not restored in the previous operation, 

unplug and plug in the sound bar again, and then turn 

the power on.

 

„

Factory reset, clearing all memory

Make sure to disconnect all output and input cables attached 

to the sound bar before performing the factory reset.

1.  Press the   button on the sound bar to enter the standby 

mode. Sound bar indication light up in red.

2.  While  pressing  the  3D  SURROUND  button  on  sound 

bar, press the   button. 

3.  “RESET” appears on the display.

Caution:

This operation will erase all data stored in memory.

Maintenance

 

„

Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth.

Caution:

 

z

Do  not  use  chemicals  for  cleaning  (petrol,  paint 

thinner, etc.). It may damage the cabinet finish.

 

z

Do not apply oil to the inside of each component. It 

may cause malfunctions.

Error indicators and warnings

When  you  fail  to  perform  operations  properly,  the 

following messages are displayed.

On sound bar

Meaning

Power indicator 

(blinks red)

 

z

When the protection circuit is 

activated.

 

z

When there is no compatible 

sound input.

Note:

Should the same message appear even if the sound 

bar is unplugged and plugged in, or is set to the standby 

mode and on again, contact your local dealer where you 

purchased the sound bar.

Summary of Contents for 8A-C22CX1

























Reviews: