background image

 

3-9 

 

Controlling CPU Speed (Windows 2000) 

 
Your computer is equipped with Intel® SpeedStep™ technology which can control 
CPU speed to reduce power consumption. 
 

 

Do not control CPU speed while communicating, or reading/writing 
data. Otherwise the computer may malfunction.

 

 

1. Double-click  or 

 icon on the taskbar. 

2. In 

Intel(R) SpeedStep(TM) technology

 dialog box, select the CPU speed 

performance. 

3. Click 

OK

 

 

• 

If 

Automatically change performance when the power source changes 

 

is checked in the dialog box, CPU speed will change automatically 
when the AC adapter is connected/disconnected except while using the 
built-in modem. 

• 

You can also select the performance by right-clicking the icon, or 
selecting 

Intel(R) SpeedStep(TM) technology

 tab in 

Power Options 

Properties

 dialog box.

 

 

Controlling CPU Speed (Windows XP Professional) 

 
Windows XP Professional will control the processor performance to reduce power 
consumption. 
 

 

Do not control the processor performance, or connect/disconnect the AC 
adapter while communicating, or reading/writing data. Otherwise the 
computer may malfunction.

 

 

1. In 

the 

Power Options Properties

 dialog box, select 

Power Schemes

 tab. 

2. 

Select an appropriate power scheme in 

Power schemes

 according to the table 

of the next page, and click 

OK

3. Close 

Power Options Properties

 dialog box; then 

Control Panel

 window. 

Summary of Contents for Actius PC-UM20






















































































































Reviews: