ADDING INSERTS WH EN PRINTING ON
TRAN SPA REN CY F ILM
(TRA NSPARENCY INSERTS)
Overview
When transparency film is used for printing, this function prevents the sheets of
transparency film from sticking together by inserting a sheet of paper between each
sheet of film. As necessary, the same content as that printed on each sheet of
transparency film is also printed on the corresponding sheet of inserted paper.
Operation
W indow s
C lick the [Special Modes] t ab.
Select [Transparency Inserts] and click the [Set tings] button.
Select the t ransparency insert settings.
When the [Printed] checkbox is selected to set to
, the same content as that
printed on the transparency film is also printed on the insert. Select the paper
source and type if needed.
Transparen c y film mu st be loade d in the bypass tray.
Se t the paper type of th e bypass tray to [Tran s pare n c y] an d load tran sparenc y film in to
the bypass tray.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
465 of 1441
3/17/2016 7:14 AM
