Sharp AE-A07CR, Operation Manual

COOL and DRY mode

Horizontal air flow

HEAT mode 

(only for AY-A07CR/AY-A09CR/AY-A12CR)

Diagonal air flow

E-10

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION

The air flow direction is automatically preset in each mode as follows for optimum
comfort:

HOW TO ADJUST THE AIR FLOW DIRECTION

COOL and DRY mode

HEAT mode (only for
AY-A07CR/AY-A09CR/
AY-A12CR)

The adjustment range
is narrower the SWING
range in order to pre-
vent condensation from
dripping.

The range is wide so the
air flow  can be directed
toward the floor.

Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.

Press the SWING button on the
remote control once.
• The vertical adjustment louvre

will change its angle continu-
ously.

Press the SWING button again
when the vertical adjustment lou-
vre is at the desired position.
• The louvre will stop moving within

the range shown in the diagram.

• The adjusted position will be

memorized and will be automati-
cally set to the same position
when operated the next time.

Adjustment range

HORIZONTAL AIR FLOW DIRECTION

CAUTION

Never attempt to adjust the vertical adjustment louvres manually.

• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction

when the remote control is used for the adjustment.

• When the vertical adjustment louvre is positioned at the lowest position in the COOL or

DRY mode for an extended period of time, condensation may result.

Do not adjust the horizontal adjustment louver extremely to the right or left when operating
the air conditioner with fan speed "SOFT" for an extended period of time.
Condensation may from on the louvers.