NOTE:
Before setting the timer, ensure that the current time is properly set.
TIMER OFF
1
Press the TIMER OFF
button.
The TIMER OFF indicator will blink; press the
TIME ADVANCE or REVERSE buttons to set
the desired time. (The time can be set in
minute increments.)
1
3
Point the remote control at the receiver window
on the indoor unit, and press the TIMER SET
(SET/C) button.
l
The yellow TIMER lamp on the indoor unit
lights up.
beep will sound when the indoor unit
the signal.
TIPS ABOUT TIMER OFF OPERATION
TO CANCEL TIMER MODE
When the TIMER OFF mode is set, the
room temperature is automatically ad-
justed to prevent the room from becom-
ing too hot or too cold while you sleep.
(Auto sleep function)
COOL/DRY MODE:
l
One hour after the timer operation
has begun, the temperature rises
higher than the thermostat setting.
HEAT MODE:
l
One hour after the timer operation
has begun, the temperature drops
3°C lower than the thermostat
setting.
Press the TIMER CANCEL (SET/C) but-
ton.
l
The yellow TIMER lamp on the indoor
unit will go out.
l
The current time will be displayed on
the remote control.
NOTE:
l
Both timers will be cancelled when
the SET/C button is pressed.
NOTE:
Auto sleep function will not activate dur-
ing the FAN ONLY mode.
First, cancel the TIMER, then set it
again.
TO CHANGE A TIME SETTING
