background image

3D SURROUND

2

 size batteries

(UM/SUM-3, R6, HP-7
or similar)

0.2 m   6 m
(8”   20’)

Demo mode

 When the AC power lead is first connected, the unit will enter

the demonstration mode and the word 

 will

scroll across the display.
To cancel the demonstration mode, press the 

 SURROUND

button.
The 3D SURROUND button will only work when the
ON/STAND-BY switch is in the STAND-BY position.

Main unit operating buttons

The main unit operating

CD/Tuner/Tape.

Some buttons cannot be
is selected.

 Remote control

buttons are common to all functions

used, depending on the function that

 When inserting or removing the batteries, push them towards

the   battery terminals.

 Installing the batteries incorrectly may cause the unit to mal-

function.

Precautions for battery use:

 Insert the batteries according to the direction indicated in the

battery compartment.

 Replace all old batteries with new ones at the same time.

 Do not mix old and new batteries.

 Remove the batteries if they are weak or if the unit is not in

use for long periods to prevent potential damage due to battery
leakage.

Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Notes concerning use:

Replace the batteries if control 

 or operation

becomes erratic.

Periodically clean the transmitter LED on the remote control

and the sensor on the main unit with a soft cloth.

 Exposing the sensor on the main unit to strong light may in-

terfere with operation. Change the lighting or the direction of
the unit.

 Keep the remote control away from moisture, excessive heat,

shock, and vibrations.

Summary of Contents for AE-X127J



































Reviews: