Sharp AH-AP18KSY, Operation Manual

E-6

VERTICAL AIR FLOW DIRECTION

1

  Press the SWING button on the remote 

control once. 

•  The vertical adjustment louvre will swing con-

tinuously. 

2

  Press the SWING button again when the 

vertical adjustment louvre is at the de-
sired position. 

• The adjusted position will be memorized and 

will be automatically set to the same position 
when operated the next time.

•  The adjustment range is narrower the SWING 

range in order to prevent condensation from 
dripping.

HORIZONTAL AIR FLOW DIRECTION

Hold the horizontal adjustment louvre lever 
and adjust the air 

fl

 ow direction.

CAUTION:

Never attempt to adjust the vertical adjustment louvre 
manually.
• Manual adjustment of the vertical adjustment lou-

vre can cause the unit to malfunction.

• When the vertical adjustment louvre is positioned 

at the lowest position in the COOL or DRY mode 
for an extended period of time, condensation may 
result.

Do not adjust the horizontal adjustment louvres to 
the extreme left or right in the COOL mode with the 
fan speed set to “SOFT ( 

 )” for an extended pe-

riod of time. Condensation may form on the louvres.

ADJUSTING THE AIR FLOW 
DIRECTION

1

2

In this operation, the air conditioner works at 
the maximum power and optimum louvre direc-
tion to makes the room cool rapidly.

1

  During operation, press the POWERFUL 

JET button.

•  The remote control will display “ 

 ” .

•  The temperature display will go off.

•  The green POWERFUL JET lamp ( 

 ) on  

  the unit will light up.

  • The vertical adjustment louvre will be set 

obliquely downward.

TO CANCEL

Press the POWERFUL JET button again.

•  The POWERFUL JET operation will also be can-

celled when the operation mode is changed, or 
when the unit is turned off.

• The green POWERFUL JET lamp ( 

 ) on the 

unit will turn off.

• The vertical adjustment louvre will return to the 

original direction.

NOTE:

• The air conditioner will operate at “Extra HIGH” 

fan speed for 30 minutes, and then shift to “HIGH” 
fan speed. 

• You can not set the temperature or fan speed 

during the POWERFUL JET operation. 

• To turn off the POWERFUL JET lamp, press the 

DISPLAY button.

POWERFUL JET OPERATION

1

Louvre lever