background image

64

HOW TO USE THE ONLINE MANUAL

The online manual provides detailed instructions for operating the unit as the printer 
or scanner and a list of methods for dealing with printing or scanner problems.
To access the online manual, your computer must have Acrobat Reader 5.0 or a 
later version. If it is not installed, refer to "Installing Acrobat Reader" (Next page).

Contents of the online manual

The contents of the online manual are as follows. Check the online manual when you use 
this unit after all the initial setup is completed.

How to use the online manual

Explains how to use the online manual.

Print

Provides information on how to print a document.

Scan

Explains how to scan using the scanner driver and how to adjust the settings for 
the Button Manager.

Troubleshooting

Provides instructions on how to solve driver or software problems.

1

Turn on your computer.

2

Insert the supplied CD-ROM into your CD-ROM drive.

3

Click the "start" button, click "My Computer" (

), and then 

double-click the CD-ROM (

) icon.

On Windows 95/98/Me/NT 4.0/2000, double-click "My Computer" (

), and 

then double-click the CD-ROM (

) icon.

4

Double-click the "MANUAL" folder, 
and then double-click the 
"MAN_ENU.PDF" icon.

The following window will appear.

Summary of Contents for AL-1216





















































































Reviews: