18
3
Press the tray select (
) key to select the multi-bypass tray.
The single bypass (AL-1215/AL-1530CS/AL-1540CS)
1
Select copy and print settings before you begin the copy job.
For information on the copy settings, see "MAKING COPIES" (p.46)". For
information on the print settings, see the online manual or the Help file for
the printer driver, and then begin printing from the single bypass.
2
Set the paper guides to the paper width. Insert a single sheet of
copy or print paper (print face down) into the feed slot of the
single bypass.
Using copy mode
When you insert the paper, the machine will automatically draw in the paper
and begin copying.
Using printer mode
After
appears in the
display, wait until the Paper
feed location indicator for the
single bypass illuminates and
insert the paper. The machine
will automatically draw in the
paper and begin printing.
•
Paper must be fed narrow side into the feed slot.
•
Special papers such as transparency film, labels, and envelopes
must be fed one sheet at a time through the multi-bypass tray.
•
When copying onto transparency film, remove each copy
promptly. Do not let copies stack up.
•
If you insert a sheet of paper into the single bypass when multiple
copies have been set with the copy quantity setting (p.49), the copy
quantity setting will change to "0" and only one copy will be made.
•
When copying onto transparency film, remove each copy promptly.
Do not let copies stack up.
Note for loading envelopes
• Envelopes must be fed narrow side into the feed slot at a time.
• Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers,
string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use
envelopes that are filled with air or envelopes that have labels or stamps attached.
• Envelopes of which the surface is not flat because of embossing may cause the
copies/prints to become smudged.
• Under high humidity and temperature conditions the glue flaps on some envelopes
may become sticky and be sealed closed when copied/printed.
• Use only envelopes which are flat and crisply folded. Curled or poorly formed
envelopes may be poorly printed or may cause misfeeds.
• Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the
printer driver. (For detailed information on printer driver, refer to the online manual.)
• It is recommended that you perform a test print before performing the actual copied/
printed job.
Print face
AL-1215_1530-1551CS.book 18
ページ
２００２年８月７日 水曜日 午前９時３４分
