39
GENERAL INFORMA
TION
3
Press the START (
) key.
●
The entered program number will be steadily lit on the left side of the
copy quantity display and the currently selected parameter number for
the program will blink on the right side.
4
Select the desired parameter using the right copy quantity
(
) key.
●
The entered parameter number will blink on the right side of the copy
quantity display.
●
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., enter 2.
USER PROGRAMS
User programs
Program name
Parameters
Auto clear time
0
e
OFF
1
e
30 sec.
* 2
e
60 sec.
3
e
90 sec.
4
e
120 sec.
5
e
10 sec.
Preheat mode
0
e
OFF
1
e
30 sec.
2
e
60 sec.
* 3
e
90 sec.
4
e
120 sec.
Auto power shut-off timer
* 1
e
30 min.
2
e
60 min.
3
e
90 min.
4
e
120 min.
5
e
240 min.
Stream feeding mode
* 0
e
OFF
1
e
ON
Auto power shut-off setting
0
e
OFF
* 1
e
ON
Auto paper select mode
0
e
OFF
* 1
e
ON
Factory default settings are indicated with an asterisk (*).
If you select “0” (OFF) in a program, the corresponding function will be disabled.
5
Press the START (
) key.
●
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6
To continue with other user programs, press the CLEAR
(
) key and then repeat steps 2 to 5. To exit the user
program mode, press the light (
) key.
●
All the alarm indicators will go out.
Summary of Contents for AL-1640 - B/W Laser - Copier
Page 58: ...57 MEMO ...
Page 59: ...MEMO ...
