background image

75

END-USER LIMITED WARRANTY (Valid in U.S.A. only)

SHARP ELECTRONICS CORPORATION warrants to the first end-user purchaser that this Sharp brand 

product (the "Product"), when shipped in its original container, will be free from defective workmanship 

and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product 

or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for 

the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) 

set forth below nor to any Product the exterior of which has been damaged or defaced, which has been 

subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or 

modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth 

below and provide proof of purchase to the servicer.
To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive 

of, all other warranties, express or implied.  Specifically, ALL OTHER WARRANTIES OTHER THAN 

THOSE SET FORTH ABOVE ARE EXCLUDED.  ALL EXPRESS AND IMPLIED WARRANTIES 

INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS 

FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED.  If, under applicable state law, 

implied warranties may not validly be disclaimed or excluded, the duration of such implied warranties is 

limited to the period(s) from the date of purchase set forth below.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other 

than those described herein, or to extend the duration of any warranties beyond the time period described 

herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be 

the sole and exclusive remedy available to the purchaser.  Correction of defects, in the manner and for the 

period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of 

Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, 

whether based on contract, negligence, strict liability or otherwise.  In no event shall Sharp be liable, or in 

any way responsible, for any damages or defects in the Product which were caused by repairs or attempted 

repairs performed by anyone other than an authorized servicer.  Nor shall Sharp be liable or in any way 

responsible for any incidental or consequential economic or property damage.  Some states do not allow 

limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may 

not apply.

Model Specific Section

Your Product Model Number & Description:

AL-1642CS Digital Multifunctional System

(Be sure to have this information available when you need 

service for your Product.)

Warranty Period for this Product:

One (1) year on parts and one (1) year on labor from date of 

purchase, except for the  toner/developer cartridge and drum 

cartridge supplied with the Product, which are warranted for a 

period of fifteen (15) days from date of purchase. Disk media 

supplied with the Product is warranted for replacement only 

and limited to ninety (90) days from date of purchase.

Additional Item(s) Excluded from

The warranty does not apply to defects or damage resulting

 

Warranty Coverage (if any):

from improper or inadequate maintenance by the purchaser 

(see Operation Manual) or the use of non-genuine Sharp 

toner/developer and drum cartridges.

Where to Obtain Service:

Service is available in the United States from Sharp. You may 

ship in your Product for repair or replacement. Replacement 

units may be remanufactured, rather than new, but your 

original limited warranty will continue for the remainder of 

your original warranty period or ninety (90) days from the 

date we send the replacement unit to you, whichever is 

longer.

What to do to Obtain Service:

Call Sharp at 1-630-378-3590 to obtain a Return 

Authorization Number and shipping instructions. A 

technician will work with you on the phone and if it is 

determined that your Product needs service, you will have 

your choice of having your unit repaired or replaced to any 

U.S. location. Be sure to have Proof of Purchase available.

AL-1642CS_Manual.book  75 

ページ

  

2005年3月3日 木曜日 午後5時34分

Summary of Contents for AL-1642CS


































































































Reviews: