AL-1651CS TEST COMMAND, TROUBLE CODES 10 - 11
26
03
Second cassette setting
(2ND TRAY)
[Function]
When this test command is executed, the current set second cassette is displayed. Enter the code
number corresponding to the desired second cassette and press [ENTER/START] key to save the
setting.
[Operation]
The operation is similar to test command 21-01.
04
Main unit duplex setting
(DPLX)
[Function]
When this test command is executed, the current set duplex is displayed. Enter the code number cor-
responding to the desired duplex and press [ENTER/START] key to save the setting.
[Operation]
The operation is similar to test command 21-01.
06
Destination setting
(DESTINATION)
[Function]
When this test command is executed, the current set destination is displayed. Enter the code number
corresponding to the desired destination and press [ENTER/START] key to save the setting.
∗
For Japan AB series, there is no schedule for production.
[Operation]
The operation is similar to test command 21-01.
07
Machine conditions check
(CPM)
[Function]
When this test command is executed, the current machine setting is displayed.
[Operation]
20
Rear edge void setting (END
EDGE)
[Function]
When this test command is executed, the current set rear edge void is displayed. Enter the code num-
ber corresponding to the desired rear edge void and press [ENTER/START] key to save the setting.
[Operation]
The operation is similar to test command 21-01.
Main
code
Sub
code
Contents
Details of function/operation
Code number
Second cassette
Display item
0
Second cassette NO
OFF
1
Second cassette YES
ON
Code number
Duplex
Display item
0
Duplex NO
OFF
1
Duplex YES
ON
Code number
Destination
Display item
0
Inch series
INCH
1
EX Japan AB series
AB
2
Japan AB series
–
3
China (EX Japan AB China paper support)
CHINA
CPM
Coy quantity
Remark
10 CPM
10
12 CPM
12
13 CPM
13
14 CPM
14
15 CPM
15
16 CPM
16
1) The machine setting is displayed.
26-07 CPM
10 CPM
Code number
Setting
Display item
Remark
0
Rear edge void NO
OFF
1
Rear edge void YES
ON
Default
