12
2
Pr
inting
2
PRINTING
PRINTING A PAGE
The printing method is described below. Read the description with the operation manual for the
application to be used.
●
Before you can use this machine as a printer, you must install the supplied
SHARP printer driver. Once this software has been installed, you can control
the printing of your documents from the printer driver which appears on your
computer screen. See INSTALLING THE PRINTER DRIVER SOFTWARE
on page 5.
●
When using multiple printers, you must change the printer setting from the
control panel to change the printer to be used. This machine cannot be used
with other GDI printers and printers that use the Windows Printing System.
For details, see USING OTHER INSTALLED DRIVERS on page 22.
Executing printing
1
Ensure that paper of the desired size is loaded in the paper tray. (See the section on
LOADING COPY PAPER in the copier operation manual.)
To print onto special papers such as transparency film, labels, thick paper and
envelopes, specify “Manual Feed” as the paper source using the printer driver,
and feed it one sheet at a time.
2
Turn on the machine. The ready (
) indicator will light up.
3
Select the settings for printing such as the number of sets and paper type from the
application. See SETTING PRINT CONDITIONS FROM PRINTER DRIVER on page 14.
Before printing, ensure that the AL-841 has been selected as the printer.
4
Print the file from your software application.
●
If copying is being performed when printing is started, copying will continue.
After copying is complete, printing will be executed when the clear (
) key is
pressed twice or approximately 60 seconds (auto clear time)* has elapsed.
* The auto clear time varies with a user program setting. See the copier
operation manual.
●
Preheat mode and auto power shut-off mode will be canceled when printing
is started.
Summary of Contents for AL-841
Page 32: ......
