39
AN-PR1500H_EN.fm
06/3/14
AN-PR1500H
TINSEA127AWZZ
1
DVD Operation
To change the angle
You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angle.
Notes:
The angle number is not displayed if angles are not recorded on the disc.
Refer to the manual of the disc as the operation may vary depending on the disc.
To zoom images (zoom)
You can zoom in and zoom out the image during playback.
To return to normal view:
Press the ZOOM button repeatedly to select “ZOOM:OFF”.
Notes:
Images may become distorted when zoomed.
Subtitles cannot be zoomed.
For JPEG ZOOM function, please refer page 46 for details.
To play the contents between the specified
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying it during playback.
Notes:
A-B repeat play is disabled on some discs.
A-B repeat play for DVD is possible only within a chapter.
Some scenes on DVD may not allow A-B repeat play.
To select a subtitle or audio language from
the disc menu
You can select the desired subtitle or audio language and sound system [Dolby Digital
(5.1ch) or Dolby Digital (2ch)] on your DVD if it has disc menu.
Note:
The procedure shown here provides only general steps. The actual procedure for
using the disc menu depends on the disc. See the disc jacket for details.
When “
” is displayed in the upper left corner of the TV screen,
press the ANGLE button repeatedly to select the desired angle
number.
1
Whilst a disc is playing, press the ZOOM button.
Each press of the ZOOM button cycles through the zoom setting as belows:
2
To shift the view and display the desired
part of a zoomed image, press the
, ,
or button repeatedly.
2
ZOOM 2
ZOOM 3
ZOOM:OFF
ZOOM 1/4
ZOOM 1/2
ZOOM 4
ZOOM 1/3
PLAY (Normal play)
1
Whilst a disc is playing, press SHIFT and A
B button
simultaneously.
This registers the start point (A).
2
Press SHIFT and A
B button simultaneously again to enter the
end point (B).
This starts A-B repeat from the start point (A) to the end point (B).
3
Press SHIFT and A
B button simultaneously to return to the
normal playback.
1
Whilst in the stop or playback mode, press the TOP MENU/
MENU button to display the disc menu.
2
Press the
, ,
or button to change the setting and press the
ENTER button.
WMA
REPEAT A -
POINT A
A
TV screen
Unit display
REPEAT A - B
A B
POINT B
B
TV screen
Unit display
