background image

E-9

Assembling the glass shelf (continued)

Step 4

Place the glass on the Glass Shelf Supports as shown. 

Make  sure  all  the  Glass  Protector  guides  are  inserted 

perfectly into the holes of the left and right Glass Shelf 

Supports.

Notes:

 

z

The  glass  is  made  of  reinforced  glass,  but  dropping 

pointed objects on it or strongly hitting the surface may 

cause it to break.

 

z

The glass shelf is not fastened to the unit. Avoid han-

dling the glass when transporting the unit, otherwise it 

may fall off and there is a risk of damage and injury.

Hole

Glass protector 

guide

Assembling the Sound bar Support (optional)

Step 1

Fix the wall mount angle (comes with Sound bar 

unit) to the Sound bar Support (E) using 4 pieces 

of M4 [12mm] screws (L). Fasten them with a “+” 

screw driver.

Step 2

Screw the Sound bar Support (E) to the Sound bar U Bracket 

(F) using 4 pieces of M6 [35mm] screws (J) with 4 pieces of 

Flange Nuts (M). Insert 8 pieces of Sound bar Spacers (R) as 

shown below. Fasten them with M6 Allen key (P).

Notes:

You can omit the Sound bar Spacers (R) if you like but when 

you do this, make sure that the screw type is changed from 

M6 [35mm] (J) to M6 [16mm] (K)

You can include your Sound bar system to this unit to enhance the sound of your LCD TV.

R

WALL MOUNT ANGLE

(not supplied)

Label

AN-WS350_OM_EN.indd   9

2009-08-19   23:01:37

Summary of Contents for AN-WS350
















Reviews: