8
Part Names of Main Unit
Controls
NOTE
•
TV/VIDEO
,
CH (
)/(
)
,
i
(–)/(+) (Volume)
and
MENU
on the main unit have the same functions as the same buttons on the
remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.
Headphone jack
Plug the headphone mini-plug into the Headphone jack
located on the front of the LCD TV set. (See page 6.)
OPC sensor
Remote sensor
OPC indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green when the
“Backlight” is set to “Auto (OPC)”. (See page 21.)
STANDBY/ON indicator
STANDBY/ON indicator lights up green when the power is on,
and red when in the standby mode (the indicator will not light
when the main power is off). The indicator blinks red when the
LCD TV set receives the remote control signal, and orange
when the wake-up timer is set (the indicator will lights when in
the standby mode).
To change the vertical angle of the LCD TV
set, tilt the screen up to 5 degrees forward
or 10 degrees backward. The LCD TV set
can also be rotated up to 25 degrees to right
and left. Please adjust the angle so that the
LCD TV set can be watched most comfort-
ably.
Card Lamp
When timer recording is set: Orange
When recording: Red
During standby: Green
PC Card Slot
X
(MAIN POWER)
Upper control panel
TV/VIDEO
MENU
CH (
)/(
)
i
(–)/(+) (Volume)
Speaker
Tilt the display by grabbing onto
the carrying handle while securely
holding down the stand with your
other hand.
How to adjust the angle
Speaker
LC-20B5E_E_P01-10.p65
04.2.3, 4:40 PM
8
Summary of Contents for AQUOS LC-15B5E
Page 66: ...64 ...