Connecting a USB device or external devices
10 -
- 11
•
Cables used to extend the USB device must be certified
as USB 2�0�
•
Video playback via a USB device may not be possible or
the playback quality affected if the device data transfer
speed rating is too low�
•
File number over 1000 may not be displayed�
•
No quickly operation between play / pause /
fast forward / rewind�
•
The video might get judder or unsmooth when USB
read/write speed is under requirement(some Full HD
format)�
•
Files in USB 1�1 devices may not be played properly�
•
Some video file formats may not be played depending
on the file�
Inserting the Smartcard into CA module
In order to receive coded digital stations, a Conditional
Access module (CA module) and a Smartcard must be
inserted into the CI (Common Interface) slot of the TV�
The CA module and the Smartcard are not supplied
accessories� They are usually available from your
dealer�
Inserting the Smartcard into the CA module
1�
Carefully insert the CA module into the CI slot
with the contact-side forward�
2�
The logo on the CA module must be facing
outward from the rear of the TV�
NOTE
•
It takes about 30 seconds to certify the license key
when you insert a Smartcard into the CI+ compatible
CA module for the first time� This process may fail when
there is no antenna input or you have never run “Auto
installation”�
•
The CI+ compatible CA module sometimes upgrades
its firmware� You may not receive any TV images before
upgrading� You can only use the power button during
upgrading�
•
The CI+ compatible CA module does not allow you to
output any copy protected programmes using monitor
out�
•
If the TV displays an update confirmation message
for the Smartcard while receiving CI+ compatible
broadcasts, follow the screen prompts�
•
Make sure that the CA module is properly inserted�
Checking CA module information
After inserting and activating the CA module, make
sure the input source is
TV
�
NOTE
•
This menu is only available for digital stations�
•
The content of this menu depends on the provider of the
CA module�
Module:
General information on CA module displays�
Menu:
Adjustment parameters of each Smartcard
displays�
Enquiry:
You can input numerical values such as
passwords here�
HDMI connection
System Standby
•
When set to “On”, turning off the TV will
automatically turn off the connected HDMI-CEC
compliant device �
Audio return channel (ARC)
The TV can send audio data for video content shown
on the TV to a connected audio device with just one
ARC-compatible HDMI cable� Using this function
eliminates the need to use a separate digital or
analogue audio cable�
Connection for using “Audio return channel”
•
You need to use ARC-compatible cables/devices
and connect to the
HDMI 1
terminal to activate this
function�
Supported display resolutions
Computer formats (PC)
Resolution
Refresh rate
640 x 480
60Hz
800 x 600
60Hz
1024 x 768
60Hz
1280 x 768
60Hz
1360 x 768
60Hz
1280 x 1024
60Hz
Video formats
Resolution
Refresh rate
480i
60Hz
480p
60Hz
576i
50Hz
576p
50Hz
720p
50Hz, 60Hz
1080i
50Hz, 60Hz
1080p
(HDMI only) 50Hz, 60Hz, 24Hz
