9
Information display
Press . The program information will appear for
approx. 5 seconds.
Quick View
button allows you to go back to the last selected
TV channel.
When you press
during external input mode, TV
switches to the last channel.
Also, when you press
during TV, you will not
return to external input mode, but only switch channels
between last channel and current channel.
MUTE
Press . The sound will be cut off.
The MUTE can be released by pressing again or
(Volume) +
or
-
.
Still picture
Press
FREEZE
to make a still picture. To cancel the
still picture, press
FREEZE
again.
NOTE
• The still picture function is available only for TV and AV-input
mode.
• During still picture mode, Aspect Ratio feature is not
available. (If you press
PICTURE SIZE
, still picture mode
will be canceled.)
• During the playback of a movie
fi
le in MEDIA mode, still
picture function is not available.
NOTE
• During TV or external input mode, if there is no signal
reception, the TV will change to standby after approx. 15
minutes (PC mode: 5 minutes).
• Some functions are activated and de-activated with the
same key. Others require
RETURN
key for de-activating.
Teletext
Teletext is sent page by page. This unit is able to
automatically store up to 899 pages, but they can only
be accessed once they have been stored. This can
take a few moments.
TT Language menu allows the installation of the
teletext language.
The languages displayed are only those supported by
the channel.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special directory.
On the lower part of the screen there are four different
coloured
fi
elds (red, green, yellow and blue). These
fi
elds lead directly to the pages shown within. The
coloured buttons on the remote control correspond
to the coloured
fi
elds. Press the appropriate coloured
button in order to activate the desired colour
fi
eld.
Switch on / off Teletext
Teletext is not transmitted by all channels.
Select a channel that shows teletext.
Press
. You will now see a teletext page.
(If “100” is shown without any text information, it may
mean that the channel you have selected does not
support teletext.)
Press
again. Teletext and TV picture are shown
simultaneously.
Press
again in order to switch off teletext.
Press
again in order to switch on teletext again. The
last page which was stored is now shown.
NOTE
• You cannot select any other channels as long as teletext is
switched on. Switch teletext off when you want to switch
over to another channel.
Select Page
Press
P +/-
until the page you desire appears. Or ...
enter the requested page number by using the
10
Number Buttons
.
And if you mistype something, just enter the complete
3-digit wrong page number then enter the desired
number again. Or ... press one of the coloured teletext
buttons so that a page from Fastext/TOPtext is shown.
Hold Pages
Some pages are divided up into subpages by the
channel.
Subpages are automatically shown in turn, as they are
transmitted. In order to hold the page, press
. Press
again in order to display the next subpage.
Directly Select Subpages
You can directly select the subpages if required. You
may use one of two operations.
1. Press
in order to select subpage 2. 0 0 0 0
is shown. Enter
0 0 0 2
. It can take a minute before
subpage 0002 appears. Press
again in order
to switch off the subpage feature.
Or:
2. Wait a few seconds, and the right now available
subpages will be shown in the bottom line. Select
your page with
c
/
d
.
Enlargement
In order to enlarge the display, press .
Either the upper or lower half of the screen is enlarged.
Each time you press you switch between the
display of the upper or lower half of the screen or the
full picture.
Answering Quiz Questions
Some pages contain quiz questions with concealed
answers.
Press
in order to show the answers.
J3PI2101B_EN.indd 9
J3PI2101B_EN.indd 9
5/27/2013 1:57:22 PM
5/27/2013 1:57:22 PM
