26
Advanced picture adjustments
This TV provides various advanced functions for
optimizing the picture quality.
Black
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
Press
MENU
to display the MENU screen, and
then press
c
/
d
to select “Picture”.
Press
a
/
b
to select “Advanced”, and then
press
ENTER
.
Press
a
/
b
to select a specifi c adjustment
item, and then press
ENTER
.
• You can select “Color Temp.”, “Black”, “I/P
Setting”, “Film Mode”, “3D-Y/C”, “Monochrome”,
or “Range of OPC”.
Press
a
/
b
(or
c
/
d
) to select the desired
parameter.
• See the table for the selectable parameters.
Color Temperature
For a better white balance, use color temperature
correction.
Film Mode (3:2 pull-down)
Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still fi lm frame for high-defi nition picture quality.
Basic adjustment settings
1
3
2
4
Press
MENU
to exit.
5
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
White with Bluish tone
White with Reddish tone
Selected item
On
Off
Description
For high detail in black portions
No adjustment
Selected item
On
Off
Description
Detects, analyzes, converts fi lm source
Normal viewing mode
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
NOTE
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
Monochrome
For viewing a video in monochrome.
Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
e
16 and a minimum of
f
16.
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Selected item
Slow
Standard
Fast
Off (2D)
Description
For still images
Normal adjustment
For moving images
For Game Mode
Selected item
On
Off
Description
For viewing in monochrome
Normal color
Selected item
Max.
Min.
Description
f
15 through
e
16
f
16 through
e
15
I/P Setting
Converts input signals depending on the type of
images.
NOTE
• “I/P Setting” is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080I.
Selected item
Fast
Slow
Description
Suitable for fast-moving images
Suitable for smooth images with low
amounts of fl ickers
NOTE
• “Film Mode” does not function when you set:
— the “AV Mode” to “Game” or
— the “I/P Setting” to “Fast”.
LC32̲37M43U̲E.indb 26
LC32̲37M43U̲E.indb 26
2007/05/17 10:19:59
2007/05/17 10:19:59
Summary of Contents for Aquos LC-32M43U
Page 2: ......
