background image

Useful features

WIDE MODE

You can select the picture size. Selectable picture size 
varies with the type of signal received.

Normal:

 For 4:3 “standard” pictures. A side bar 

appears on each side.

Zoom 14:9:

 For 14:9 letterbox pictures. A thin side bar 

appears on each side, and you may see bars on the 
top and bottom with some programmes.

Panorama:

 In this mode the picture is progressively 

stretched toward each side of the screen.

Full:

 For 16:9 squeeze pictures.

Cinema 16:9:

 For 16:9 letterbox pictures. Bars 

may appear on the top and bottom with some 
programmes.

Cinema 14:9:

 For 14:9 letterbox pictures. Bars 

may appear on the top and bottom with some 
programmes.

Full:

 Display with the Overscan image. Crop all sides of 

screen.

Manual Selection

Press 

f

.

•  The WIDE MODE menu displays.
•  The menu lists the wide mode options selectable for 

the type of video signal currently received.

Press 

f

 or 

a

/

b

 while the WIDE MODE menu 

displays on the screen.

•  As you toggle down the options, each is immediately 

reflected on the screen. No need to press 

OK

.

Auto Selection

If you set WSS and 4:3 Mode in the Setup menu on 
page 18, the optimum WIDE MODE is automatically 
chosen for every broadcast, VCR or DVD containing 
the WSS information.

WSS menu

To enable Auto Selection, set WSS in the Setup menu 
to “On”. (See page 18.)

4:3 Mode menu

To set the type of the wide screen, select “Normal” or 
“Panorama” in the 4:3 Mode menu. (See page 18.)

1

2

NOTE

•  If the signal contains no WSS information, Auto Selection 

will not function even when the WSS option is enabled.

WIDE MODE

You can select the picture size.

Press 

f

.

•  The WIDE MODE menu displays.

Press 

f

 or 

a

/

b

 to select a desired item on 

the menu.

NOTE

•  Connect the PC before making adjustments. (See page 

10.)

•  Selectable picture size may vary with input signal type.

EXAMPLE

1

2

Normal:

 Keeps the original aspect ratio in a full screen 

display.

Full:

 An image fully fills the screen. 

 20

Item (for SD (Standard-Definition) signal)

Item (for HD (High-Definition) signal)

Normal

Full

Item

TV/AV only

PC only

4:3 Mode set to “Normal”

4:3 Mode set to “Panorama”

LC-37D44E-gb.indd   20

LC-37D44E-gb.indd   20

2008/06/16   13:38:28

2008/06/16   13:38:28

Summary of Contents for AQUOS LC-37D44E









































Reviews: