44
Using external equipment
AVC System (rear view)
DVD player
Component cable (commercially available)
SCART cable
(commercially available)
When using component
cable, select
“COMPONENT” for “Input
Select” in the menu.
Watching a DVD image
Connecting a DVD player
You can use the INPUT 3 terminal when connecting to a DVD player and other audiovisual equipment.
Displaying a DVD image
To watch a DVD image, select “INPUT3” from “INPUT
SOURCE” menu using
b
on the remote control unit
or
INPUT
on the Display.
Then select “INPUT3” on “Input Select” in the menu to
set the correct input signal type. (See page 52.)
The setting is stored and can be selected in the “INPUT
SOURCE” menu.
NOTE
• Each time
b
is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
• Refer to your DVD player operation manual for the signal
type.
TV MENU
Option
Input Select
COMPONENT
Y/C
CVBS
RGB
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
(For INPUT3 signal)
