32
Watching TV
Energy conservation settings
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
1
Press
SLEEP
.
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
2
Each time you press
SLEEP
, the remaining
time switches as shown below.
0 hr. 30 min. 1
hr. 00 min. 1
hr. 30 min.
2 hr. 30 min.
2 hr. 00 min.
Off
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing
SLEEP
to cancel the sleep timer.
ECO picture control
This function automatically detects the image source
and decreases the power consumption while keeping
the brightness of the image unchanged.
1
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “ECO”.
• ECO menu displays.
3
Press
a
/
b
to select “ECO picture control”,
and then press
ENTER
.
4
Press
c
/
d
to select “On” or “Off”, and then
press
ENTER
.
NOTE
• This function does not work when “AV MODE” is set to
“DYNAMIC (Fixed)” or “AUTO”.
• This function does not work when “Energy save” is set to
“Standard” or “Advanced”.
Energy save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
1
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “ECO”.
• ECO menu displays.
3
Press
a
/
b
to select “Energy save”, and then
press
ENTER
.
4
Press
a
/
b
to select “Standard” or
“Advanced”, and then press
ENTER
.
Selected item
Description
Standard
Reduces the backlight brightness by
25%.
Advanced
Reduces the backlight brightness by
50%.
Off
The backlight brightness is the same
value of your settings in the selected “AV
MODE ”.
Blu-ray disc Ecology
You can control the power on/off status of the Disc
Drive when power to the TV is on.
1
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “ECO”.
• ECO menu displays.
3
Press
a
/
b
to select “Blu-ray disc Ecology”,
and then press
ENTER
.
4
Press
c
/
d
to select “Enable” or “Disable”,
and then press
ENTER
.
Selected item
Description
Enable
Power to Disc Drive is turned on when a
disc is inserted or when the input source
is switched to Blu-ray.
Disable
Power to Disc Drive is turned on when TV
power is turned on.
LC-40LB700X_en_d.indd 32
LC-40LB700X_en_d.indd 32
8/10/2009 9:58:43 AM
8/10/2009 9:58:43 AM
