65
Playback Setting
H
Parental Control
This lets you set the Parental Control depending on the
disc content. The available Parental Control Levels are
shown below.
The 4-digit password number needs to be entered
before the Parental Control Levels and the Country
Code are set. The Parental Control Levels and the
Country Code cannot be set if a password has not
been created or the password is not entered.
For DVD-VIDEO:
8 and Off:
All DVD-VIDEO can be played.
1-7:
Prohibits play of DVD-VIDEO with corresponding
ratings recorded on them.
For BD-ROM:
No
Limit:
All BD-VIDEO can be played.
0 – 99 year(s):
Prohibits play of BD-VIDEO with
corresponding ratings recorded on them.
Country Code:
Set the Country Code. Refer to the Country Code List
(see page 69) because the ratings differ according to the
country.
H
Disc Language (Disc Priority Language)
This lets you select the language for subtitles, audio
and menus displayed on the screen.
Subtitle:
Refer to the Language List. (See page 69.)
Audio:
Refer to the Language List. (See page 69.)
Menu:
Refer to the Language List and the Language Code
List. (See page 69.)
H
Angle Mark Display
This lets you turn the Angle Mark Display on or off
when DVD-VIDEO recorded with multiple angles is
played back.
Yes:
The Angle Mark is displayed in the lower right screen.
No:
The Angle Mark is not displayed.
H
PIN Code Setting
This sets the PIN code for setting or changing the
Parental Control Level.
Yes:
Enter the 4-digit number.
No:
Select this when not setting the PIN code.
H
BD Internet Access
This allows you to set access restriction to BD-LIVE
contents.
Item
Permit:
Allow all BD-LIVE discs.
Limit:
Allow only discs with owner certifi cation.
Prohibit:
Prohibit all BD-LIVE discs.
NOTE
• The available functions differ depending on the disc.
• Regarding playback method of BD-LIVE contents, etc.,
perform the operations in accordance with the instructions
in the BD disc manual.
• To enjoy BD-LIVE functions, perform the broadband
internet connection (page 16) and communication settings
(pages 66–67).
Audio Video Settings
H
Play Format
Set the playback setting for content recorded in 24Hz.
Auto:
The content is played back in 24Hz.
Off:
The content is played back in 60Hz.
H
Secondary Audio
This toggles the clicking sound on the menu and audio
with secondary video in picture in picture mode for BD-
VIDEO.
On:
BD-VIDEO that includes secondary audio compatible
with Picture in Picture can be played back with secondary
audio.
Off:
Secondary audio does not output.
NOTE
• “On” is the factory preset value.
• Select “Off” when enjoying the high quality sounds of BD-
VIDEO.
• You cannot change the Secondary Audio setting during
playback.
H
Digital Audio Out
You can set Digital Audio Out when connecting to
SURROUND equipment.
Bitstream:
Select this when connecting to SURROUND
equipment with a built-in decoder for DOLBY DIGITAL, etc.
Setting to Bitstream will output each audio signal by
Bitstream.
PCM:
Select this when connecting to 2-channel stereo
audio equipment.
Setting to PCM will output by converting each audio signal
into PCM 2-channel audio signal.
NOTE
• See page 68 for information on output of next generation
audio formats.
H
Dynamic Range Control
This lets you adjust the range between the loudest and
softest sounds (dynamic range) for playback at average
volume. Use this when it is hard to hear dialog.
Normal:
The same audio output range is played as the
original recorded audio output range.
Shift*:
When Dolby Digital audio is played back, the
dynamic range of the audio is adjusted so that the dialog
portion can be heard easily. (If the audio sounds abnormal,
set to “Normal”.)
* Lower the audio volume before setting. If you do not do so,
the speakers may emit a loud sound or excessive output
may be applied to the speakers.
Blu-ray disc Setup
LC-40LB700X_en_g.indd 65
LC-40LB700X_en_g.indd 65
8/10/2009 10:06:16 AM
8/10/2009 10:06:16 AM
