67
Blu-ray disc Setup
Communication Setup (continued)
12
For the advanced setting (the setting of the
Ethernet connection speeds), press
c
/
d
to
select “Yes” or “No”, then press
ENTER
.
• Normally select “No”, then press
ENTER
. (Go to
the step 14.)
Perform advanced setup?
Yes
No
• The Ethernet connection speeds can be set when
you select “Yes”, then press
ENTER
.
13
For the Option Ethernet connection speeds,
press
c
/
d
to select the connection speed,
then press
ENTER
.
Option
ETHERNET Connection Speeds
Auto-Detection
10M Half Duplex
100M Half Duplex
10M Full Duplex
100M Full Duplex
Next
• As automatic detection is made (factory preset
mode), this setting is not normally necessary. If a
situation occurs in which the Ethernet connection
fails, etc., change the setting and confi rm if the
Ethernet connection successfully works.
When the connection speed is set, select “Next”,
then press
ENTER
.
14
For testing the connection to the internet, after
confi rming the settings, press
c
/
d
to select
“Test”, then press
ENTER
.
• “Test” is available only when setting to obtain
the IP address automatically. “Test” cannot be
selected if the IP address has not been obtained
automatically.
Confirm the current setting.
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xx:xx:xx:xx:xx:xx
IP Address
Netmask
Gateway
DNS Address
MAC Address
Complete
• As a result of the test, if the internet connection
fails, enter the setup values manually.
15
Press
c
/
d
to select “Complete”, then press
ENTER
.
LC-40LB700X_en_g.indd 67
LC-40LB700X_en_g.indd 67
8/7/2009 12:37:56 PM
8/7/2009 12:37:56 PM
