15
*
Press
RESET
if the System cannot return to its original state after performing various operations.
This will reset the System as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
**
Press
SYSTEM RESET
if the System does not operate after starting up.
NOTE
• Pressing
RESET
will not work if the System is in standby mode (indicator lights red).
• Pressing
RESET
will not delete channel preset and password. See page 56 for resetting the password when you know it.
See page 69 for initialising to the factory preset values in case you forget your password.
Part names
AVC System
Front view
Rear view
RESET*
POWER button
INPUT 4 terminal
(S-VIDEO)
INPUT 4 terminal (VIDEO)
SYSTEM RESET**
INPUT 4 terminal (AUDIO L/R)
How to open the door
.
POWER indicator
PC CARD slot
CARD indicator
Headphone
(When connecting headphones, the sound from the speakers is muted.)
• Still image mode deactivates.
• Teletext mode resets to normal.
• Speaker setting resets to SPEAKER-A.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.
INPUT 5 terminal
(AUDIO R/L)
ANTENNA INPUT
terminal
INPUT 5
terminal
(DVI-I)
CENTRE CHANNEL
INPUT terminal
AV OUTPUT
terminal
(VIDEO)
DC OUTPUT
terminal
(Terminal for expanded
functionality in the near
future.)
DISPLAY OUTPUT 1
terminal
RS-232C**
terminal
DISPLAY
OUTPUT 3
terminal
AV OUTPUT
terminals
(AUDIO L/R)
INPUT 3 (Y, P
B
, P
R
)
INPUT 3 (SCART)
INPUT 1 (SCART)
DISPLAY OUTPUT 2
terminal
SPEAKER-B
terminal
AC INPUT
terminal
INPUT 2 (SCART)
DIGITAL AUDIO OUTPUT* terminal
*Connect a digital audio equipment.
**Provided for command from PC (see pages 64 and 65).
•
Use RCA/SCART conversion connector to connect with external equipment. Connector without S-video input is
for INPUT 1. Connectors with S-video input are for INPUT 2 and 3.
LC-45G1X(E)-a
04.10.15, 9:59 AM
15
