LC-52/60/70LE640U/C6400U,LC-80LE633U/844U (1st Edition)
5 – 64
10)INPUT MODE FIXED
11)RC_PATH_THROUGH
12)AV POSITION FIXED
13)LOUD SPEAKER (ON/OFF)
14)232C POWON
Selection
Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)” (loop provided)
Default
– (Variable)
Explanation
•
At the “Fixed” setting, the TV set gets started with the settings of “Input mode start”, and then any other channels and inputs
are not accepted.
•
At the “ACON (AC CTRL)” setting, the TV set gets started with the settings of “Input mode start” under AC control.
•
At the “AC/RCON (AC/RC CTRL)” setting, the TV set gets started with the settings of “Input mode start” under either control.
Limit in Setting
•
With the execution of hotel mode, the input source is forced to change to that set by “Input mode start” and the channel
switching and input switching are prohibited thereafter.
•
ON-timer's (Wake-up timer) channel items are not displayed or the operation is prohibited. (Basically, they are not displayed.)
•
The following keys are invalidated.
CH
/
, direct tuning button, FLASHBACK, input
However, the keys (input switching and CH
/
keys) of the unit for menu operation remain valid.
Exception
None
Remarks
•
In the following case, setting is cancelled and mode is changed to “Variable”.
When the setting of “Input mode start” is set to “Normal”.
Selection
Selection between “OFF”, “ON: TV RCE” and “ON: TV RCD” (loop provided)
Default
OFF
Explanation
Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.
Limit in Setting
None
Exception
None
Remarks
None
Selection
Selection between “Variable” and “Fixed” (loop provided)
Default
Variable
Explanation
In case of “Fixed” setting,
– Menu “Picture” and “Audio” setting can't be changed like “Dynamic (Fixed)”.
– When “AV Mode” key is pressed, TV just displays current AV Mode (cannot be changed.).
Limit in Setting
None
Exception
None
Remarks
•
When receiving with AV Position key, OPC, Dolby key and other direct audio select keys, the current display stays on and no
setting can be changed.
•
Even by initializing personal information, the hotel-mode settings are kept intact. In this way, the AV positions, video and
audio adjustment settings are not initialized.
Selection
Selection between “ON” and “OFF” (loop provided)
Default
ON
Explanation
If “OFF” is selected, TV stops Speaker output even without Headphone connected.
Limit in Setting
None
Exception
None
Remarks
•
Press the volume UP/DOWN key, and the mute icon appears for 4 seconds.
•
The mute key and audio-related keys are displayed with caution.
•
Usually, the headphones and monitor audio outputs can be adjustable.
Selection
Selection between “Disable” and “Enable” (loop provided)
Default
Disable
Explanation
In the standby mode, the power-on by the 232C command is enabled or disabled.
Limit in Setting
None
Exception
None
Remarks
None
Summary of Contents for AQUOS LC-52LE640U
