LC-52/60LE830E,RU/831E,S/833E
5 – 4
7. List of adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu header.
Page
Line
Item
Description
Remarks (adjustment detail, etc.)
1/24
[INFO]
1
MAIN Version
1xxx(xxxxx)
Main software version
2
BOOT Version
xxxxxxx
BOOT Version.
3
Monitor Version
xxxxxxx
Monitor software version
4
T-CON Version/LED CON Version
xxxxxxxx/xxxx
T-CON/LED CON Version
5
NET TV KEY / MAC
xxxxxxx
NET TV KEY / MAC Address
6
CI+INFO/SECURE BOOT
xxxxx/YES
CI+ Key Information/SECURE BOOT
7
MARLIN
xxxxxxx
8
FRC Version
xxxxxxx
9
TOUCH SENSOR / IR Micom Version
xxxxxxx
10
LAMP ERROR
0
Number of termination due to lamp error.
11
MONITOR ERR CAUSE
1)xxxxxx 2)xxxxxx
3)xxxxxx 4)xxxxxx
Last error standby cause.
12
NORMAL STANDBY CAUSE
0
Situation that became standby at the end.
(Excluding the error)
13
ERROR STANDBY CAUSE
0 0 0 0
Error standby cause
2/24
[INIT]
1
INDUSTRY INIT
Enter
Initialization to factory settings execution.
2
INDUSTRY INIT(-Public)
OFF
Initialization to factory settings execution.(Public mode is excluded)
3
PUBLIC MODE
OFF
Public mode ON/OFF setting
4
Center Acutime
-
Main operating hours.
5
RESET
OFF
Main operating hours reset.
6
Backlight Acutime
-
Backlight operating hours.
7
RESET
OFF
Backlight operating hours reset.
8
LAMP ERROR RESET
OFF
Lamp error reset.
9
ADJ PARAM SET
Enter
ADJ PARAM SET
10
VIC XPOS
0
X-coordinate setting for VIC READ
11
VIC YPOS
0
Y-coordinate setting for VIC READ
12
VIC SIGNAL TYPE
MAIN
Signal type setting for VIC READ
13
VIC READ
OFF
Picture level acquisition function
(Level appears in green on the upper right)
3/24
[TUNER ADJ]
1
TUNER ADJ
Enter
TUNER auto adjustment execution
2
PAL+TUNER ADJ
Enter
PAL TUNER auto adjustment execution
3
TUNER ADJ(SMPTE)
Enter
TUNER auto adjustment execution (SMPTE)
4
PAL+TUNER ADJ(SMPTE)
Enter
PAL TUNER auto adjustment execution (SMPTE)
5
TUNER ADJ(SMPTE CH57)
Enter
TUNER auto adjustment execution (SMPTE CH57)
6
PAL+TUNER ADJ(SMPTE CH57)
Enter
PAL TUNER auto adjustment execution (SMPTE CH57)
7
TUNER CONTRAST A_GAIN
14
TUNER signal level adjustment
8
TUNER CONTRAST D_GAIN
2048
TUNER signal level adjustment
9
TUNER CONTRAST OFFSET
256
TUNER signal level adjustment
4/24
[PAL MAIN]
1
PAL ADJ
Enter
PAL adjustment
2
SECAM ADJ
Enter
SECAM adjustment
3
N358 ADJ
Enter
N358 adjustment
4
PAL CONTRAST A_GAIN
14
PAL contrast adjustment
5
PAL CONTRAST D_GAIN
2048
PAL contrast adjustment
6
PAL CONTRAST OFFSET
256
PAL contrast adjustment
7
SECAM CONTRAST A_GAIN
14
SECAM contrast adjustment
8
SECAM CONTRAST D_GAIN
2048
SECAM contrast adjustment
9
SECAM CONTRAST OFFSET
256
SECAM contrast adjustment
10
N358 CONTRAST A_GAIN
14
N358 contrast adjustment
11
N358 CONTRAST D_GAIN
2048
N358 contrast adjustment
12
N358 CONTRAST OFFSET
256
N358 contrast adjustment
5/24
[CEC TEST]
1
HDMI CEC TEST
Enter
HDMI CEC test
2
HDMI EDID WRITE
Enter
HDMI EDID WRITING
3
INSPECT USB TERM
Enter
Reading inspection of USB memory terminal
4
MONIDATA READ[TEMP/OPC]
OFF
MONITOR Temperature/ OPC Acquisition tool.
5
SD CARD TEST
Enter
SD CARD TEST
6
CAUSE RESET
Enter
Reset of standby cause
