Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size alkaline batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size alkaline batteries.
Place batteries with their terminals corresponding to the
(
e
) and (
f
) indications in the battery compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
Do not overuse the light-up function of the
LIGHT
D
button, doing so may shorten the battery life. Replace the batteries
when the light on the LCD window or the light-up function becomes weak or when the window
becomes blurry.
Do not continue to use the remote control unit with the batteries running low. This may result in
error message or malfunction. Should this happen replace the batteries and leave it unused for a
while. Otherwise, you may open the rear battery cover and press the
RESET
button. When you
press the
RESET
button, your universal remote control settings will be deleted.
The remote control unit has a internal memory of external devices. In order not to lose the data,
replace the batteries quickly. If the manufacturer code is initialised and lost, you can input the
manufacturer code again (See page 50–53).
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
1
2
•
3
•
•
•
•
•
•
•
•
•
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the remote
control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the Display
is under direct sunlight or strong lighting. In such cases, change the angle of the lighting
or the Display, or operate the remote control unit closer to the remote control sensor.
•
•
•
30°
30°
6
5 m
Remote control sensor
RESET
button
Summary of Contents for Aquos LC-52XS1E
Page 62: ...Memo 60 ...
