77
Enjoying 3D image viewing
Specifications — 3D glasses (sold separately)
Troubleshooting — 3D Images
Product
3D Glasses
Model number
AN-3DG40
Lens type
Liquid crystal shutter
Power supply
DC3V
Battery
Lithium button battery (CR2025 x 1)
Battery life
Approx. 100 hours of continuous use
Dimension (W x H x D)
171.2 × 46.0 × 162.4 mm
Weight
Approx. 31.0 g (including the lithium ion polymer
rechargeable battery)
Operating temperature
10°C to 40°C (The 3D glasses cannot operate fully at extreme
high or low temperatures. Please use them within the
specified usage temperature range.)
S/N : 8 2 P
Manufacture number
The product serial number is displayed on the 3D glasses as indicated in the illustration on
the left. The first three digits represent the date of manufacture.
Example: Manufactured on February 23, 2013
1: 1
2: 2
3: 3
8 : 8
9 : 9
A : 10
B : 11
C : 12
1: 1
2: 2
3: 3
A : 10
B : 11
H : 17
J : 18
N : 22
P : 23
W : 30
X : 31
Month of
manufacture
Day of
manufacture
* “I”, “O”, “Y” and “Z” are not used.
NOTE
• Please contact your local authority for the correct method of disposal of this product
and/or packing.
Problem
Possible solution
• 3D images are not
displayed.
• Is “3D auto change” set to “Off”? Press
3D
to switch to
3D mode (Page 76).
• If “3D auto change” is set to “Mode1” or “Mode2” but
no 3D images are displayed, check the display format of
the content being viewed. Some 3D image signals may
not be recognized as 3D images automatically. Press
3D
to select the appropriate display format for the 3D
image (Page 76).
• Is the power of the 3D glasses turned on? Press the
power button for at least 2 seconds to turn on the 3D
glasses.
• Are the 3D glasses set to 2D mode? Press the power
button for an amount of time that is less than 2 seconds
to switch the 3D glasses to 3D mode.
• Is there an obstacle between the 3D glasses and the
TV, or is something covering the receiver on the 3D
glasses? The 3D glasses operate by receiving a signal
from the TV. Do not place anything between the 3D
emitter on the TV and the receiver on the 3D glasses.
• Images displayed in 3D
mode appear doubled
while you are wearing the
3D glasses.
• Is the power of the 3D glasses turned on? Press the
power button for at least 2 seconds to turn on the 3D
glasses.
• Images displayed in 3D
mode appear 2D while
you are wearing the 3D
glasses.
• Are the 3D glasses set to 2D mode? Press the power
button while viewing 2D images, the LED light blinks in
green and the 2D images switch to 3D images.
• For further details, refer to the operation manual of the 3D glasses.
Summary of Contents for AQUOS LC-80LE657KN
Page 94: ...13P05 PL NG ...
