Sharp AQUOS LC-C6077UN Operation Manual Download

Page: 28 / 32

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.

This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage

temperature:

4°F to

140°F (

20°C to

60°C)

Troubleshooting - Digital Broadcasting

The error message about reception of broadcast

• Failed to receive broadcast.

E203

• Check the broadcast time in the program guide.

The example of an error message

displayed on a screen

• No broadcast now.

Error code

E202

Possible Solution

• Check the antenna cable. Check that the antenna is correctly

setup.

Problem

Possible Solution

• No picture

• Is connection to other components correct?

Page 10

• Is correct input signal source selected after connection?

Page 23

• Is the correct input selected?

Page 14

• Is “On” selected in “Audio Only”?

Page 23

• If the PC image is not displayed, check the following:

- When connecting a laptop PC to the TV, check that display output mode of the

PC is set to external monitor.

- Check the resolution setting on the PC. Is a non-compatible signal being input?

Page 31

• Picture quality of HD programs is

poor.

• To enjoy HD images from external equipment, you are required to set up HDMI

connection or component connection.

• If the program content is not of HD quality, HD images cannot be displayed. Check

that the program you are viewing provides HD images.

• The HD cable/satellite set-top box may need to be confi gured to output HD images

via cable/satellite.

• The cable/satellite broadcast may not support a signal resolution of 1080p.

• The TV sometimes makes a

cracking sound.

• This is not a malfunction. This happens when the cabinet slightly expands and

contracts according to change in temperature. This does not affect the TV's
performance.

Appendix

LC-C6577UM̲6077UN̲E̲04.indd 28

2009/09/02 20:10:50

Summary of Contents for AQUOS LC-C6077UN

































Search results

Summary of Contents for AQUOS LC-C6077UN

Reviews:

Related manuals for AQUOS LC-C6077UN

Brands by name

Popular brands

Sharp AQUOS LC-C6077UN, Operation Manual

Search results

Summary of Contents for AQUOS LC-C6077UN

Reviews:

Related manuals for AQUOS LC-C6077UN

Brands by name

Popular brands