Example
Initial setup (Continue)
Analogue setting
You can reconfigure the TV channel settings
automatically or manually using Auto search
or Manual adjust.
Auto search
You can also automatically search by
performing the procedure below.This is the
same function as programme auto search in
auto installation.
1. Press MENU and the MENU screen
displays.
2. Press / to select "Initial setup".
3. Press / to select "Analogue setting",
and then press ENTER. If you have already
set the password, enter it here.
See "Child lock" to set password.
4. Press / to select "Auto search", and
then press ENTER. You do not need to do
anything during the auto search. Press
MENU to exit.
Manual adjust
You can set some channel items manually.
1. Repeat steps 1 to 3 in Auto search.
2. Press / to select "Manual adjust", and
then press ENTER.
3. Press / to select your desired item,
press ENTER, and then press
/ or / to adjust the settings.
Current CH: Select the channel you want to
edit.
Sound system: Select the optimum sound
system (Broadcasting system) to receive.
(B/G, D/K, I, M).
Colour system: Select the optimum colour
system to receive. (NTSC 3.58,NTSC 4.43,
PAL, SECAM).
Search: Start searching from current channel.
Fine-tune: Tune the frequency of the stored
channel to your desired position.
NOTE
The frequency shown below the On-Screen
Display shows the real-time frequency of
the displayed channel.
On-Screen Display Menu
EN 4-7
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ |
| INDONESIA |
| TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
