177
Handset Settings
Auto sleep Off
Make settings for the display when lifting or holding the
handset with your hand.
1
In the home screen, select “apps folder”
▶
[Settings]
▶
[AQUOS Useful]
▶
[Auto sleep Off]
2
Select an item
Turn screen on by holding
: Set whether to turn the display on
after you lift the handset and keep it stationary while the
display is turned off.
Bright Keep
: Set whether to set the display not to be turned
off while holding the handset with your hand.
[Turn screen on by holding]
z
This function is enabled by default.
z
In the following cases, etc., the display may not be turned on.
When you are moving with the handset held (while getting in
a car)
When you keep the handset moving before or after lifting it
When you lift the handset vertically or horizontally
[Bright Keep]
z
If you do not move or operate the handset for a certain period
of time, the display may be turned off even while Bright Keep is
set and you are holding the handset with your hand.
ROBOQUL setting
When connecting the handset to ROBOQUL (commercially
available), ROBOQUL rotates and turns to you according to the
time when the screen is turned on and charging starts,
incoming calls, alarms, etc. Also, EMOPA talks to you
according to the situation. ROBOQUL links to EMOPA, and it
faces and talks to you while EMOPA is activated.
z
If you set EMOPA to ON, ROBOQUL links to EMOPA and
activates much more situation.
1
In the home screen, select “apps folder”
▶
[Settings]
▶
[AQUOS Useful]
▶
[ROBOQUL
setting]
2
Select an item
Operations of ROBOQUL
: Set whether to activate
ROBOQUL while charging the handset with ROBOQUL.
More info
: Connect to the SHARP website and check more
information about ROBOQUL.
Summary of Contents for AQUOS R3 SH-04L
Page 1: ...INSTRUCTION MANUAL SH 04L ...