154
Handset Settings
Setting an access point
An access point (sp-mode) for Internet connection is registered by
default. You can add other access points and change them if
necessary.
For details on sp-mode, refer to the DOCOMO website.
(
https://www.nttdocomo.co.jp/service/spmode/
)
(in Japanese only)
If you use mopera U or Business mopera Internet, add an access
point of either provider manually.
For details on mopera U, refer to the mopera U website.
(
https://www.mopera.net/
)
(in Japanese only)
1
In the home screen, [ ]
▶
[Settings]
▶
[More]
▶
[Cellular networks]
▶
[Access Point Names]
z
You can check an access point in use.
2
[
]
3
[Name]
▶
enter the name of the network profile
to create
▶
[OK]
4
[APN]
▶
enter the access point name
▶
[OK]
5
Enter other items required by network operators
▶
[
]
▶
[Save]
z
Never set the MCC to a figure other than 440 or the MNC to
a figure other than 10. Otherwise the added access point
disappears from the screen.
z
If the settings of MCC and MNC are changed and the added
access point disappears from the screen, reset the settings or
set the access point manually.
Resetting an access point
Reset an access point to default setting.
1
In the home screen, [ ]
▶
[Settings]
▶
[More]
▶
[Cellular networks]
▶
[Access Point Names]
2
[
]
▶
[Reset to default]
z
When sp-mode is not subscribed or if you fail to make
automatic setting of an access point due to signal status such
as outside the service area, you are required to set the access
point again manually.
