193
Appendix/Index
z
Suddenly the handset becomes unavailable during overseas use
y
Make sure the approximate limit of usage fee is not exceeded.
As for “international roaming service (WORLD WING)”, the
approximate limit of usage fee is set in advance. Pay off the
usage fee to resume services if usage fee exceeds the limit.
z
The other party's phone number is not notified/A different phone
number from that of the other party is notified/Functions to use
details saved in the phonebook or Caller ID notification are not
activated
y
The caller ID is not displayed on the handset even though the
other party makes a call with the caller ID set to be notified if
the used network or network operator does not notify. In
addition, a different phone number from that of the other party
may be notified depending on the used network or network
operator.
Data management
z
Data is not transferred
y
Make sure a USB HUB is not used. If used, the transference
may not be carried out normally.
y
Make sure Use USB to is not set to [Charge this device].
z
Data saved on the microSD Card is not displayed
y
Remove the microSD Card and insert it again.
z
Images are not displayed correctly
y
An entire image goes black when the image data is damaged.
Bluetooth function
z
Cannot connect with Bluetooth connection compatible device/
Cannot find it even if searching
y
Set the Bluetooth connection compatible device (commercially
available) side to the registration stand-by status and register
it from the handset side. To delete the registered device once
and register it again, both the Bluetooth connection compatible
device (commercially available) and the handset are required
to be deleted on each side.
z
Calls cannot be made from the handset with an external device
such as a car navigation system or hands-free device connected
y
Making a call to a phone number may become unavailable if
you make multiple calls to the phone number in the condition
that the other party does not answer or outside the service
area. In this case, turn off the handset power and turn it on
again.
Map/GPS function
z
Cannot set AUTO-GPS service information
y
Make sure AUTO-GPS has not been suspended due to
insufficient battery level. If AUTO-GPS has been suspended
due to Low-power operation settings, you cannot set AUTO-
GPS service information. In this case, set Low-power
operation settings to [Not suspend] or charge the battery to set
the service.
P. 36 “Charging”, P. 155 “docomo service/
y
Make sure [AUTO-GPS operation settings] is not disabled.
