- 22 -
●
Do not use in places subject to lots of dust or vibration. Doing so might
cause a fault.
●
Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The
display may be stained if splash or smear is left attached to the surface.
Wiping the product using alcohol, thinner, benzene, detergent, glass
cleaner, etc. might erase the printing on the outer casing or cause a fault.
●
Use as far away as possible from fixed-line phones, TVs and radios. Use
nearby might affect them.
●
The product may become warm while charging or during other operations,
depending on the situation, but this is not abnormal.
●
Do not place near corrosive chemicals or in places where corrosive gas is
generated. Doing so might cause a fault.
●
Do not use outside when you can hear thunder. Doing so might risk
lightning strikes and electric shock.
●
Be sure to use only the specified peripheral devices. Use of other
peripheral devices might cause a fault.
●
Do not put the product in a cooking apparatus such as microwave oven or
a pressure vessel. Doing so might cause a fault.
●
The customer is not allowed to disassemble, modify or repair the product.
Doing so might cause a fault. Also, modification of the product is in violation
of the Radio Law and/or the Telecommunications Business Law.
●
To prevent short-circuiting of the connection jack and earphone/microphone
jack, do not allow your fingers or any other part of your body or conductive
materials (metal, pencil lead, etc.) to come in contact with or enter these
areas. Doing so might cause a fault.
●
Disconnect the power plug of the specified charger (sold separately)
immediately if it is wet during charging.
●
Do not use product while driving a car or riding a motorbike or bicycle or
while walking. Use of it while driving a car or riding a motorbike is
prohibited by law. Use of a cell phone while riding a bicycle may be
punishable by some regulations.
●
Do not use or charge the product in the bag or with it covered by bedding
etc. Doing so might cause a fault.
●
When using a charger or external device, insert/remove the connector
straight to/from the jack. Inserting/removing in an incorrect orientation might
cause a fault.
