background image

- 33 -

 

Organic EL (OLED) display

 

Lighting intensity of OLED can be partly decreased and displayed color 
can be changed when the same image has been displayed for a long 
time, the brightness set to bright more than necessary or using extremely 
for a long time. It is not abnormal because that is the characteristic of 
OLED.

 

Although the OLED used on the product is made using high-precision 
technology, some pixels (dots) might be lit or out at all times. Also, streaky 
colors, uneven brightness or color changes may be shown if looked at 
from different angles. Note that that is because of the structure of OLED, 
not a fault.

 

Leaving the OLED exposed to the direct sunlight might cause a fault. Take 
care when you place the product by the window or outside.

 

Internal battery

(The internal battery of the product is a lithium-ion battery.)
The internal battery is not fully charged at the time of purchase. Charge the 
battery before using the product. Also charge the battery after long periods 
of disuse before using the product.

 

Use in very hot or cold environments, for example, when left in an 
automobile with the windows closed in summer, will cause the internal 
battery capacity to drop and shorten the available battery usage time. 
This will also shorten the internal battery's service life. Try to use the 
internal battery as much as possible at room temperature.

 

The internal battery gradually discharges after charging even if the 
product is not used. The internal battery may discharge completely after 
long time no use. Charge before using the product.

Summary of Contents for Aquos sense6s

























































Reviews: