28
ec40_e_05.fm
[28/28]
Various settings
Set the date and time and the date format.
1
In the home screen, [
R
]
/
[Settings]
/
[Date & time]
2
Select an item
Automatic
: Set whether to adjust the date and time automatically.
Set date
: Set the date manually.
Select time zone
: Set the time zone manually.
Set time
: Set the time manually.
Use 24-hour format
: Switch 12-hour format/24-hour format.
Select date format
: Set the date format to display.
Check information about the phone.
1
In the home screen, [
R
]
/
[Settings]
/
[About phone]
2
Select an item
Status
: You can check the battery level, network in use, etc.
Battery use
: You can check the battery usage per application.
Adjust sensitivity of sensor
: Adjust accuracy of motion sensor and geomagnetic sensor.
Twin Camera Calibration
: Recalibrate the twin camera.
Major Update
: Upgrade OS version of the phone by connecting the phone to your PC.
• For details on upgrade
n
P. 44
Legal information
: You can check copyright notice, terms of service, etc.
Model number
: You can check the model number.
Android version
: You can check the Android version.
Baseband version
: You can check the baseband version.
Kernel version
: You can check the kernel version.
Build number
: You can check the build number.
For safe use of the phone, the use of some functions requires security codes. Use security codes with various functions to fully utilize the phone.
Entered Lock No. (security code for each function) and PIN code are marked with [•].
/
Lock No. (for various functions)
Lock No. is set to [0000] by default but you can change the number (
n
P. 26).
If you enter the wrong Lock No. five times continuously, you cannot enter it for 30 seconds.
/
PIN code
A SIM card has a security code called a PIN code. This security code is set to [1111] by default but you can change the code (
n
P. 26).
The PIN code is a four- to eight-digit security code that is entered when a SIM card is inserted or when the phone is turned on to prevent unauthorized use by a third
party. Making/receiving a call and operation of the phone are enabled by entering the PIN code.
Use the previously set PIN code when inserting a SIM card that has been used in another phone. It is [1111] if the setting has not been changed.
If you enter the wrong PIN code three times continuously, it is locked. In this case, unlock with “PUK” (PIN Unlock Key).
/
PUK (PIN Unlock Key)
PUK (PIN Unlock Key) is an eight-digit number used to disable the PIN code lock. You cannot change the code.
If you enter the wrong code ten times continuously, the SIM card is completely locked.
1
In the PIN locking screen, [Emergency call]
2
Enter “**05*”
/
enter PUK (PIN Unlock Key)
/
enter “*”
/
enter the new PIN code
/
enter “*”
/
enter the new PIN code again
/
enter “#”
:
Enter “**05*88888888*7777*7777#” to change PIN code to “7777” when PUK (PIN Unlock Key) is “88888888”.
Date & time
When [Automatic] is enabled
If the phone does not adjust the time for a while after the power is turned on, turn off the power and restart it.
Time may not be adjusted depending on the signal status.
Time may be off by a few seconds.
About phone
[Adjust sensitivity of sensor]
Perform the adjustment for a while after the adjustment screen appears.
Adjustment may fail depending on surroundings or other simultaneously running applications. If this occurs, change your location, end running applications, etc.
Security codes
Security codes used on the phone
Precautions for various security codes
Do not use simple or predictable numbers for security codes such as “birthdays”, “phone numbers”, “address or room numbers”, “1111” or “1234”, etc. Keep a
separate memo of security codes.
Keep security codes private. If the security codes are found and improperly used by others, SHARP shall not be liable for any loss of the user’s.
Disabling PIN lock
ec40_e.book 28 ページ ２０１１年９月１３日 火曜日 午後５時１１分
