short-circuiting, etc.
Do not use Charger where water is regularly in use (kitchens, bathrooms, shower rooms, etc.);
may cause fire or electric shock.
Care & Maintenance
Proper care of Card Slot Cover gasket is crucial for continued handset water/dust resistance.
Observe the following:
・
Do not remove or damage gasket. Keep it clean.
・
If Card Slot Cover is damaged or deformed, contact a SoftBank Shop.
Do not insert a sharp object into Card Slot Cover gap, Earphones-Microphone Port or External
Device Port.
To maintain water/dust resistance, it is recommended to replace Card Slot Cover every 2 years
regardless of its condition. Customer-requested Card Slot Cover replacement incurs fees and
requires handset submission. For details, contact a SoftBank Shop or SoftBank Customer Support,
General Information
.
Washing Handset
Wipe off dirt, sand, beverage, etc., gently with a cloth. Then hold handset approximately 10 cm below
faucet or shower head and wash with low-pressure tap water (6 liters/min. or lower) at room
temperature (5
o
C - 35
o
C). Wash with your hands, taking care not to open Card Slot Cover; do not
use a brush or sponge. Dry handset before use; after drying it well, power on.
Before washing handset, make sure that Card Slot Cover is closed firmly.
Do not use a washing machine or ultrasonic cleaner.
Earphones-Microphone Port and External Device Port tend to accumulate dust, sand, etc.; rinse
and dry them completely before use. Any residue may cause malfunction, burns or fire.
Do not put a cotton swab, cloth, etc. into Earphones-Microphone Port or External Device Port;
water resistance may be affected causing malfunction.
Drying Handset
After exposing handset to water, be sure to dry Receiver, Power Key, Volume Up/Down Key, Mic,
Recorder Mic, Pressure Vent, Speaker, Earphones-Microphone Port and External Device Port.
51
