4
■
Punch function (only when a punch unit is installed)
When an optional punch unit is installed on the
saddle stitch finisher, holes can be punched in the
output. Punched output is delivered to the offset
tray.
The punch function cannot be used in combination
with the saddle stitch (pamphlet stapling) function.
For paper sizes that can be punched, see the
specifications on page 2.
Original 1
[Example]
Punch hole positions
Original 2
Punch hole positions
•
The following types of paper cannot be stapled:
Transparency film, heavy paper, label sheets, envelopes, postcards, thin paper
•
The following types of paper cannot be punched:
Transparency film, label sheets, envelopes, postcards, thin paper
•
Be sure to select the same paper size for the output. Stapling and punching are not possible
when different sizes are mixed together. Note, however, that if the widths are the same, the
"mix size original feeding mode"* function can be used to staple and punch different sizes of
paper (saddle stitch is not possible).
* Stapling and punching are not possible if "mix size original feeding mode" includes sizes
that cannot be stapled (such as 5-1/2" x 8-1/2" and A5).
Caution
AR-F14.book 4
ページ
２００４年１月１５日 木曜日 午後６時１０分
