AR-M150/M155/M155X TEST COMMAND, TROUBLE CODES 10 - 4
2
02
SPF sensor status display
(SPF SENSOR) (Disabled
when set to OC) (Executable
only when the SPF is
installed.)
[Function]
The ON/OFF status of the SPF sensors can be checked with the LCD.
When a sensor is ON, the sensor name is displayed on the LCD.
[Operation]
03
SPF motor operation check
(SPF MOTOR CHK)
(Disabled when set to OC)
(Executable only when the
SPF is installed.)
[Function]
When [OK (ENTER)/START] key is pressed, the motor rotates for 10sec at the speed corresponding
to the set magnification ratio.
[Operation]
The operation is similar to test command 1-01.
06
RSPF resist clutch operation
check (RSPF RES.CHK)
(Enabled only when RSPF is
set.) (Executable only when
the RSPF is installed.)
[Function]
When [OK (ENTER)/START] key is pressed, the RSPF resist clutch (SRRC) repeats ON for 500ms
and OFF for 500ms 20 times.
[Operation]
08
SPF paper feed solenoid
operation check (SPF SPUS
CHK) (Disabled when set to
OC) (Executable only when
the SPF is installed.)
[Function]
The SPF paper feed solenoid (SPUS) repeats ON for 500ms and OFF for 500ms 20 times by the use
of the solenoid drive control Bios.
[Operation]
09
RSPF reverse solenoid
operation check (RSPF
SPFS CHK) (Enabled only
when RSPF is set.)
(Executable only when the
RSPF is installed.)
[Function]
The SPF reverse solenoid (SPFS) repeats ON for 500ms and OFF for 500ms 20 times by the use of
the solenoid drive control Bios.
[Operation]
10
RSPF paper exit gate
solenoid operation check
(RSPF SGS CHK) (Enabled
only when RSPF is set.)
(Executable only when the
RSPF is installed.)
[Function]
The SPF paper exit gate solenoid (SGS) repeats ON for 500ms and OFF for 500ms 20 times by the
use of the solenoid drive control Bios.
[Operation]
3
03
Shifter operation check
(SHIFTER CHK)
[Function]
The shifter is moved back and forth in four reciprocations.
[Operation]
Main
code
Sub
code
Contents
Details of function/operation
Sensor
Display item
Document set sensor
SPID
SPF document transport sensor
SPPD
SPF paper feed cover open/close sensor
SDSW
1) Initial display
2) When the sensor is ON:
02-02 SPF SENSOR
02-02 SPF SENSOR
SPID SPPD SDSW
1) Initial display
02-06 RSPF RES.CHK
EXECUTING...
1) Initial display
02-08 SPF SPUS CHK
EXECUTING...
1) Initial display
02-09 RSPF SPFS CHK
EXECUTING...
1) Initial display
02-10 RSPF SGS CHK
EXECUTING...
1) Initial display
03-03 SHIFTER CHK
EXECUTING...