3
PRINTING FROM MACINTOSH
21
C O N T E N T S
I N D E X
Basic printing
(part 1)
To use the machine as a printer for the Macintosh, the PS3 expansion kit (AR-PK1) must be installed and the machine must be
connected to a network. To install the PPD file and configure the printer driver settings, see the software setup guide.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
1
Make sure that the ON LINE indicator on the
operation panel is lit.
If the ON LINE indicator is not lit, press the [ON LINE]
key (
).
When the indicator is:
●
Lit, the machine is online and
ready to print, or is printing.
●
Blinking, the machine is
processing print data in memory
or printing has been paused.
●
Off, the machine is off-line
and cannot print.
2
Start the application and open the document
that you wish to print.
3
Select "Print" from the application's "File"
menu.
4
Make sure that the correct printer is selected.
ON LINE
●
The machine name that appears in the "Printer:" menu
is the name that was entered when AppleTalk settings
were configured from the "Network Utilities" CD-ROM.
Unless the name was changed when configuring the
settings, it will be "SCxxxxxx" (where "xxxxxx" is a
sequence of characters that varies depending on your
machine).
●
The Print window varies depending on the operating
system version, the printer driver version, and the
application.
Note