Sharp AR-PK6, Software Setup Manual

REQUIREMENTS FOR MACINTOSH

9

■

■

■

■

Mac OS 8.6 - 9.2.2

1

Select [Chooser] from the Apple
Menu.

2

Click the [LaserWriter 8] icon.

●

The model name of your network-connected
machine ("SCxxxxxx") appears in the "Select a
PostScript Printer" list on the right.
The name of the machine that appears is the
name that was entered in the AppleTalk
settings when the network settings were
configured ("xxxxxx" is a sequence of
characters that varies depending on your
machine).

●

If multiple AppleTalk zones are displayed,
select the zone which includes the printer.

3

Click the machine's model name
("SCxxxxxx") in the "Select a
PostScript Printer" list.

4

Click the [Create] button.

●

If the "Select a PostScript™ Printer Description
File" dialog box appears, select the PPD file of
the machine, and then click the [Select] button.

●

If the "Select a PostScript™ Printer Description
File" dialog box does not appear, follow these
steps to select the PPD file manually when you
return to the Chooser dialog box.
1) Verify that the machine is selected in the

"Select a PostScript Printer" list, and then
click the [Setup] button and the [Select PPD]
button.

2) Select the PPD file of the machine, and then

click the [Open] (or [Select]) button.

3) Click the [OK] button.

5

Verify that the machine is selected
in the "Select a PostScript Printer"
list, and then click the [Setup]
button and the [Configure] button.

6

Set the printer configuration based
on the options that have been
installed, and then click the [OK]
button.

7

Click the [OK] button to close the
dialog box.

8

Click the Close box to close the
Chooser.

This completes the configuration of the printer
driver.

InstallGuide_US.book  9 

ページ

２００４年９月２日　木曜日　午前１１時１８分