121
1-BIT PORTABLE MINIDISC RECORDER MD-DR7
ENGLISH OPERA
TION MANUAL
Dividing a track
(DIVIDE) (page 78)
1. During playback, press the
button at the point where you
wish to divide the track. Playback will be paused.
2. Press the MENU button.
3. Select "EDIT" by pressing the
or
button and press
the MENU button.
4. Select "DIVIDE" by pressing the
or
button and
press the MENU button.
5. Press the MENU button. The track is now divided.
Moving a track
(MOVE) (page 79)
1. While in the stop mode or pause mode, select the track to
move by pressing the
or
button.
2. Press the MENU button.
3. Select "EDIT" by pressing the
or
button and press
the MENU button.
4. Select "MOVE" by pressing the
or
button and
press the MENU button.
5. Select the new position for the track by pressing the
or
button.
6. Press the MENU button. The track has been moved.
Stamping titles from another MiniDisc
(pages 80 - 81)
Before stamping
When same tracks are recorded on 2 MiniDiscs, you can
transfer the character information (disc name, group name,
and track name) of the master MiniDisc to another MiniDisc
(for stamping).
What is a master MiniDisc?
A recordable MiniDisc that contains tracks and character information.
What is a MiniDisc for stamping?
A recordable MiniDisc that contains the same tracks in the same
order as the master MiniDisc (tracks only).
1. Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2. While in the stop mode, press the MENU button.
3. Select "EDIT" by pressing the
or
button and press
the MENU button.
4. Select "NAME STAMP" by pressing the
or
button
and press the MENU button.
5. Press the MENU button.
6. When "CHANGE MD" appears, remove the master MiniDisc.
Remove it without turning the power off. Or the operation will
be canceled.
7. Insert the MiniDisc for stamping.
8. Press the MENU button. The information has been written.
GROUP EDITING
(pages 82 - 87)
Moving a track to another group
(GROUP CHANGE)
(page 82)
1. Insert a group-recorded MiniDisc.
2. While in the stop mode or pause mode, select the track to
move by pressing the
or
button.
3. Press the MENU button.
4. Select "GROUP" by pressing the
or
button and
press the MENU button.
5. Select "CHANGE" by pressing the
or
button and
press the MENU button.
6. Select the destination group by pressing the
or
button.
7. Press the MENU button. The track has been moved.
