Sharp CD-BK110V Operation Manual Download

Page: 31 / 39

E-30

CD-BK110V(S)E3.fm

01/9/7

ENGLISH

CD-BK110V

Recor

din

- Rec

ing t

a ca

sse

„

Recording from the radio

To interrupt recording:

Press the REC PAUSE

[

(TAPE)] button.

To resume recording, press the / ( /SELECT/RESUME) button.

To stop recording:

Press the ( /RETURN) button.

Note:

If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.

„

Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.
For recording, use only normal tapes. Do not use metal or CrO tapes.

To stop dubbing:

Press the ( /RETURN) button.
TAPE 1 and TAPE 2 will simultaneously stop.

„

Erasing recorded tapes

Note:

Make sure that the TAPE 1 is not in use.

Tune in to the desired station. (See page 25.)

Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

Press the REC PAUSE

[

(TAPE)] button.

Recording will be paused.

Press the / ( /SELECT/RE-
SUME) button to start recording.

Erase-prevention tab of cassette tapes:

When recording on a cassette tape, make
sure that the erase-prevention tabs are not re-
moved. Cassettes have removable tabs that
prevent accidental recording or erasing.

To protect the recorded sound, remove the tab
after recording. Cover the tab hole with adhe-
sive tape to record on the tape without the tab.

Side A

Tab for side B

Tab for side A

Press the ON/STAND-BY button to turn the power on.

Load a prerecorded cassette into
the TAPE 1 cassette compart-
ment. Insert a blank tape into the
TAPE 2 cassette compartment.

It is recommended that the recording
tape is the same length as the master
tape.

Press the TAPE (1 2) button un-
til "TAPE 1" appears on the dis-
play.

Press the REC PAUSE

[

(TAPE)] button.

Recording will be paused.

Press the / ( /SELECT/RE-
SUME) button to start dubbing.

Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.

Press the TAPE (1 2) button until "TAPE 2" appears on the display.

Press the REC PAUSE

[

(TAPE)] button.

Press the / ( /SELECT/RESUME) button to start erasing.

Listening to the radio (See page 25.)

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for CD-BK110V








































Search results

Summary of Contents for CD-BK110V

Reviews:

Related manuals for CD-BK110V

Brands by name

Popular brands

Sharp CD-BK110V, Operation Manual

Search results

Summary of Contents for CD-BK110V

Reviews:

Related manuals for CD-BK110V

Brands by name

Popular brands