background image

 

CD-DH790NH_com

 

i

 

2009 September8

 

BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
ERITYISHUOMAUTUS
SPECIAL NOTES

 

 

Dichiarazione di conformità

 

La società SHARP ELECTRONICS EUROPE GmbH dichiara che
il prodotto SHARP MINI SISTEMI CD-DH790NH è costruito in
conformità alle prescrizioni del D.M.no 548 del 28/8/95, pubblicato
sulla G.U.no 301 del 28/12/95 ed in particolare è conforme a
quanto indicato nell’art. 2, comma 1 dello stesso decreto.

 

 

Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist die
Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt wird,
kann das Gerät unter Verwendung der Timer-Betriebsart oder
Fernbedienung in Betrieb gesetzt werden.

 

Warnung:

 

In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.

 

 

Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position
STAND-BY, l’appareil est prêt à fonctionner par la minuterie ou la
télécommande.

 

Avertissement:

 

Cet appareil contient des pièces non réparables par l’utilisateur.
Personne non qualifiée n’enlèvera jamais les couvercles.
L’appareil contenant des organes portés à haute tension,
débrancher l’appareil avant toute réparation ou en période de non-
utilisation.

 

 

Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.

 

Advertencia:

 

Tenga en cuenta que dentro de este aparato no hay piezas que
pueda reparar. No quite nunca las tapas a menos que se esté
cualificado para hacerlo. Este aparato tiene en su interior tensiones
peligrosas. Desenchufe siempre la clavija de la red del
tomacorriente antes de realizar cusalquier servicio de
mantenimiento y cuando no se use el aparato durante un largo
período de tiempo.

 

 

När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.

 

Varning:

 

Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar. Stickkontakten ska därför dras ut från
nätuttaget före reparationsarbeten och bör dras ut om apparaten
inte ska användas på mycket länge.

 

 

Quando il tasto ON/STAND-BY si trova in posizione STAND- BY,
all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STANDBY,
l’unità può essere accesa con il modo timer o con il telecomando.

 

Avvertenza:

 

L’apparecchio non contiene parti riparabili dall’utente. Non togliere
mai i coperchi, a meno di non essere qualificati per farlo. All’interno
dell’apparecchio ci sono tensioni pericolose, per cui si deve sempre
staccare la spina del cavo d’alimentazione dalla presa di corrente
prima di qualsiasi intervento di manutenzione e quando non si usa
l’apparecchio per un lungo periodo di tempo.

 

 

Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
kan het toestel ingeschakeld worden via de timerfunctie of de
afstandsbediening.

 

Waarschuwing:

 

Dit toestel bevat geen door de gebruiker te repareren onderdelen.
Verwijder de behuizing nooit tenzij u deskundig bent op dit gebied.
In het toestel loopt een gevaarlijke spanning; haal de stekker altijd
uit het stopcontact alvorens onderhoud uit te voeren of wanneer het
toestel voor langere tijd niet gebruikt wordt.

 

 

Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação através do
modo de programação horária ou pelo controle remoto.

 

Advertência:

 

Neste aparelho não há partes que podem ser consertadas pelo
usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens perigosas.
Remova sempre o cabo de alimentação da tomada antes de
efetuar qualquer conserto ou quando deixar o aparelho muito
tempo fora de uso.

 

 

Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laitteessa
on yhä virta.
Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laite
voidaan kytkeä päälle kaukosäätimestä.

 

Varoitus:

 

Laitteen sisällä ei ole käyttäjän huollettavissa olevia osia. Kotelon
saa irrottaa vain siihen pätevöitynyt henkilö. Laitteen sisällä on
vaarallinen jännite. Laite on aina irrotettava verkkovirrasta ennen
huoltotoimenpiteitä ja jos laite on pitkään käyttämättä.

 

 

When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the
unit may be brought into operation by the timer mode or remote
control.

 

Warning:

 

This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.

 

 

Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der
stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position, kan
apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen.

 

Advarsel:

 

Apparatet indeholder ingen dele, der kan repareres af brugeren
selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil.
Apparatet indeholder farlig strømspaending. Traek altid stikket ud af
stikkontakten før der foretages reparationer, eller hvis apparatet
ikke er i brug i laengere tid

 

.

Summary of Contents for CD-DH790NH



































Reviews: