E-4
System connections (continued)
Make sure to unplug the AC power cord before making any connections.
TV
Wire
AC outlet (AC 120 V ~ 60 Hz)
FM antenna
External FM
antenna for
better reception
(not supplied)
Video cable
(not supplied)
To video input
jack
Remote control
Battery installation
Q
Use 1 “AA” size battery (UM/SUM-3, R6, HP-7 or
similar). Battery is not included.
Open the battery cover.
1
Insert the battery according to the direction indicated
2
in the battery compartment.
When inserting or removing the battery, push it toward
the battery terminal.
Close the battery cover.
3
Plug in with the lever side
facing to the top.
AM loop antenna
Caution:
Remove the battery if the unit will not be used for a
O
long period of time. This will prevent potential damage
due to battery leakage.
Do not use rechargeable batteries (nickel-cadmium
O
battery, etc.).
Installing the battery incorrectly may cause the unit to
O
malfunction.
Batteries (battery pack or batteries installed) shall not
O
be exposed to excessive heat such as sunshine, fi re
or the like.
Notes concerning use:
Replace the battery if the operating distance is reduced
O
or if the operation becomes erratic.
Periodically clean the transmitter on the remote control
O
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
O
interfere with operation. Change the lighting or the
direction of the unit.
Keep the remote control away from moisture, heat,
O
shock, and vibrations.
CD-DHS1050P_US_EN.indd 4
CD-DHS1050P_US_EN.indd 4
2/10/2011 3:32:22 PM
2/10/2011 3:32:22 PM
