background image

E-55

T

ape Playback

CD-DV650W

CD-DV850W

ENGLISH

4

Load a cassette into the TAPE 2
cassette compartment with side A
facing you.

5

Press the 

0

 button to start playback.

To stop playback:

Press the 

H

 (

H

) button.

Fast forward/rewind:

To advance the tape, press the  

2 4

 PRESET

W

 (

2

 / 

4

) button.

To rewind it, press the 

5 3 

PRESET 

X

 (

5

 / 

3

) button.

Caution:

I

To remove the cassette, press the 

H

 (

H

) button, and then open

the  compartment.

I

Before changing from one tape operation to another, press the 

H

(

H

) button.

I

If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.

Listening to a cassette tape (TAPE 2)

1

Press the ON/STAND-BY button to turn the power on.

2

Press the TAPE (1

V

2) button to select TAPE 2.

3

Open the cassette door by pushing the area marked “

7

”.

MIC

MIC LEVEL

MIN

MAX

1

2

DVD MINI SYSTEM

CD-DV650

TAPE 2

CD-DV650W_54-55

3/21/07, 3:10 PM

55

Summary of Contents for CD-DV650W











































































Reviews: