E-64
Advanced Features
CD-DV650W
CD-DV850W
ENGLISH
12
When the preset time is reached, playback or recording will
start.
In the timer playback mode, the volume will increase gradually
until it reaches the volume you were listening to before your
system entered the timer stand-by mode.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not used.
Timer and sleep operation (continued)
Note:
When performing timer playback or recording using another unit
connected to the GAME INPUT sockets, select “GAME” in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Checking the timer setting in the timer stand-by mode:
1. Press the CLOCK/TIMER button.
2. Within 10 seconds, press the
5 3
or
2 4
button to select
“ONCE” or “DAILY”, and press the MEMORY/SET (MEMORY)
button.
3. Within 10 seconds, press the
5 3
or
2 4
button to select
“ONCE CAL” or “DAILY CAL”, and press the MEMORY/SET
(MEMORY) button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1. Press the CLOCK/TIMER button.
2. Within 10 seconds, press the
5 3
or
2 4
button to select
“ONCE” or “DAILY”, and press the MEMORY/SET (MEMORY)
button.
3. Within 10 seconds, press the
5 3
or
2 4
button to select
“ONCE OFF” or “DAILY OFF”, and press the MEMORY/SET
(MEMORY) button. Timer will be cancelled (the setting will not be
cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1. Turn the power on and press the CLOCK/TIMER button.
2. Within 10 seconds, press the
5 3
or
2 4
button to select
“ONCE” or “DAILY”, and press the MEMORY/SET (MEMORY)
button.
3. Within 10 seconds, press the
5 3
or
2 4
button to select
“ONCE ON” or “DAILY ON”, and press the MEMORY/SET
(MEMORY) button.
4. Press the ON/STAND-BY button to enter the power stand-by mode.
Note:
The timer can also be set with the remote control.
CD-DV650W_62-67
3/21/07, 3:12 PM
64
