03/1/21
08-CD-E100H(H)E2.fm
E-17
ENGLISH
CD-E100H
Radio /
T
a
pe Pla
y
bac
k
Listening to the radio (continued)
T
Memorising a station
This may be operated only with the remote control.
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is discon-
nected.
T
To recall a memorised station
Listening to a cassette tape
Before playback:
1
Perform steps 1 - 3 in "Tuning" on page 16.
2
Press the MEMORY button to
enter the preset tuning sav-
ing mode.
3
Within 5 seconds, press the TUNER PRESET ( or ) but-
ton to select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press the
MEMORY button to store that
station in memory.
If the preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
Press the TUNER PRESET ( or ) button to select the de-
sired station.
z
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
z
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
z
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.